Tub-to-Shower Conversion Done in One Day. One Price. Done by 6 PM.
· Reviewed by the Cascade ShowerWorks installation team · Sam Mueller-Certified Installer Lead on every job
A tub-to-shower conversion should not take three days, two subcontractors, and a $25,000 invoice. Cascade ShowerWorks converts your alcove bathtub to a step-in walk-in shower in the same 60-inch footprint, in one day, for $9,200 to $14,400 all-in.
Old tub out at 8 AM. Cast-acrylic walls, a new shower base, a thermostatic valve, and a frameless 3/8-inch glass door installed before 6 PM. You shower in it the next morning. One Sam Mueller-certified W2 lead installer. One written quote. One lifetime warranty.
We will get back to you as soon as possible.
Please try again later.
Services
- Tub-to-Shower Conversion
- Walk-In Shower Installation
- Curbless & ADA Showers
- Custom & Stand-Up Replacements
- Glass Doors & Enclosures

Install
What a Tub-to-Shower Conversion Means at Cascade ShowerWorks
A tub-to-shower conversion at Cascade ShowerWorks replaces an alcove bathtub with a step-in walk-in shower in the same 60-inch footprint. Same wall studs. Same supply lines. Usually the same drain location. The difference is what comes out and what goes in.
Old fiberglass tub-and-surround out. New cast-acrylic walls bonded into place. New low-threshold or zero-threshold base mortared in. New thermostatic valve. New frameless glass door. The footprint stays. The plumbing stays. The wet zone gets twice the daily-use upgrade for a third of the full bath remodel cost.
This is not a tub liner. This is not a tub-cover-up. This is a full demo and rebuild of the wet zone in eight to ten hours.
Four Reasons Homeowners Convert
Homeowners book a tub-to-shower conversion for one of four reasons. The free in-home consult walks through which one is driving your decision.
The tub never gets used.
A 60-inch alcove tub steals 15 square feet of usable bathroom. If no one in the household has taken a bath in the last 12 months, the tub is dead floor space.
Stepping over the 16-inch tub wall is unsafe.
Falls in the bathroom are the #1 home injury for adults over 65 per the CDC. A step-in or curbless shower removes the highest-risk.
The original surround is failing.
Yellowed fiberglass, cracked coves, mildew through the caulk lines. A 1990s tub-shower combo that has not been replaced is past its useful life.
The home is being prepped for sale within 24 months.
Listing agents in Memorial, The Woodlands, and Sugar Land call out modern walk-in showers as a primary buyer draw. A converted master bath shows better in photos and inspection.
"Cascade ShowerWorks replaced our 1990s tub-shower combo with a tile-look walk-in in one day. The crew laid floor protection from the front door to the bathroom, hauled the old tub out, and we used the shower the next morning. Zero drama." (Verified Houston Google Review)
The Drain Question: Will Yours Need a Reroute?
The single most-asked question on a tub-to-shower consult is "do you have to move the drain?" The answer depends on your existing tub-drain location. Below is the same decision matrix our Sam Mueller-certified lead walks every homeowner through.
Most homes built between 1970 and 2010 have a left-end or right-end tub drain. We design the new shower base around the existing drain to keep cost down and avoid cutting the slab. When a slab cut is needed, the line item is on your written quote before you sign. No surprises on install day.
"See real wall samples in your bathroom. Get a written quote the same day."Book My Free Consult · Call (346) 678-4776
What's Included in Every Cascade ShowerWorks Tub-to-Shower Conversion
Every Cascade ShowerWorks tub-to-shower conversion ships the same scope. Line items below are written into your free quote.
Demolition
Existing tub, walls, surround, and door removed. Drain inspected.
Substrate prep
Studs inspected, framing reinforced for shower base, plumbing rough-in adjusted, leak test on supply lines.
New shower base
Pioneer-series solid-surface base, mortared into level, drain reconnected, base sealed.
Cast-acrylic or CMSS walls
Three-panel system, dry-fit, bonded with manufacturer adhesive, edges trimmed, niche cut.
New thermostatic valve
Forever Box pressure-tested and calibrated to 1/4-inch-per-foot drainage slope.
Fixtures & Hardware
Rain head, hand shower on slide bar, grab bar, footrest, and bench as specified.
Glass Enclosure
Frameless 3/8-inch glass door or semi-frameless 5/16-inch slider. Leveled, hung, sealed.
Final clean and walkthrough
Pressure test. Walkthrough. Punch list captured in writing.
Lifetime Warranty
Lifetime warranty registered the same day with Samuel Mueller.
What's Not Included
(No Surprises)
- Drywall repair beyond the wet-zone footprint
- Painting outside the shower
- Electrical work, lighting, or vent fan upgrades
- Vanity, toilet, or flooring outside the shower base
- Tile work outside the shower walls
Pioneer Series Walls, Base, and Hardware for Tub-to-Shower Conversion
Most Cascade ShowerWorks tub-to-shower conversions install the Pioneer series. Pioneer is built on SMC compression-molded solid surface, manufactured under 40,000 pounds of hydraulic press pressure, and finished in subway, herringbone, hexagon, or large-format tile patterns.
A 60x32 Pioneer tub-to-shower conversion runs $9,200 to $14,400 all-in. Luxura and BelAir series are available when the master bath wants a stone-look upgrade or designer finish.
Pioneer is Series I, Entry. Built on SMC compression-molded solid surface, manufactured under 40,000 pounds of hydraulic press pressure. Finish options include subway, herringbone, hexagon, or large-format tile patterns. Best for standard tub-to-shower conversion in 60x32 footprint.
Luxura is Series II, Mid. Manufactured from Cast acrylic + CMSS for a premium, non-porous finish. Patterns include marble, limestone, river stone, and classic stone. Best for master bath conversion with stone-look upgrade.
BelAir is Series III, Premium. Featuring Cast acrylic with reversible bookmatched panels that mirror natural stone veining. Finishes include sedimentary, fossil, life tree, Roman walnut, and white subway. Best for premium master conversion with bookmatched stone-look panels.
Why Cascade ShowerWorks Walls Outlast Bath Fitter, Re-Bath, and Jacuzzi
Cascade ShowerWorks walls are roughly 2x the thickness of every acrylic shower system above. The four franchise brands will not publish wall thickness. We will. Thickness is the single best predictor of how a shower wall ages in any humid climate.
| Spec | Cascade ShowerWorks (Pioneer · Luxura · BelAir) | Bath Fitter PermaFit | Re-Bath DuraBath SSP | Jacuzzi Tri-Tek |
|---|---|---|---|---|
| Wall material |
Cast acrylic + CMSS / SMC |
✖ Acrylic over fiberglass backer | ✖ Solid surface composite | ✖ Acrylic with silver-ion topcoat |
| Wall thickness |
Up to 2x competing wall thickness |
✖ Not published | ✖ Not published | ✖ Not published |
| Solid through (no exposed substrate) |
Yes (CMSS / SMC) |
✖ No | ✖ Mixed | ✖ No |
| Manufacturing pressure |
40,000 lbs hydraulic press |
✖ Vacuum-formed | ✖ Cast | ✖ Vacuum-formed |
| Wall warranty (in writing) |
Lifetime |
✖ Lifetime | ✖ Limited lifetime | ✖ Limited lifetime |
The One-Day Conversion Process: Hour by Hour
Cascade ShowerWorks installs every tub-to-shower conversion in one day. Crew arrives at 7:30 AM. Finishes by 5:30 PM. Most jobs run 8 to 10 hours total. The shower is ready to use 24 hours after completion (silicone cure time).
Crew arrival.
Floor protection from front door to bathroom. Dust containment set up.
Demolition.
Old tub disconnected, walls demoed, tub removed through front door. Drain inspected.
Substrate prep.
Studs inspected, framing reinforced for shower base footprint, plumbing rough-in adjusted, leak test on supply lines.
Base set.
New low-threshold or zero-threshold base mortared into level, drain reconnected, base sealed.
Walls installed.
Cast-acrylic or CMSS walls dry-fit, bonded with manufacturer adhesive, edges trimmed, niche cut.
Valve, hardware, accessories.
Thermostatic valve, rain head, hand shower, grab bar, footrest installed.
Door installation.
Frameless 3/8-inch glass enclosure leveled, hung, sealed.
Walkthrough.
Final clean. Pressure test. Punch list captured in writing.
The shower is ready to use 24 hours after completion(silicone cure time).
Free Consultation.
Designer arrives with Pioneer, Luxura, and BelAir samples. 60 to 90 minutes. Written quote.
Template and Order.
Digital template once signed. Lead time is 3 to 5 weeks for catalog patterns.
One-Day Install.
Two-person crew arrives at 7:30 AM, finishes by 5:30 PM.
Final Warranty.
Registered with Samuel Mueller the same day.
The Four-Step Homeowner Journey
Cascade ShowerWorks handles the full project lifecycle from design to registration. Every step is managed by W2 staff, ensuring the same engineering crew that templates your shower performs your installation.
Tub-to-Shower Conversion Cost in 2026
A Cascade ShowerWorks tub-to-shower conversion runs $9,200 to $14,400 (Pioneer series, 60x32 footprint, frameless 3/8-inch door, thermostatic valve, one accessory). The franchise companies charge $17,000 to $32,000 for the same scope. The price gap is franchise overhead, not material grade. Cascade ShowerWorks installs the same cast-acrylic technology, sometimes the exact same panel, for thousands less because we do not fund a corporate call center.
The Provider Price Comparison
| Provider | Price (Same 60x32 Scope) |
|---|---|
| Bath Fitter | $18,000 – $25,000 |
| Re-Bath | $17,000 – $26,000 |
| Jacuzzi Bath Remodel | $20,800 – $29,000 |
| Statewide | $28,000 – $32,000 |
| Cascade ShowerWorks Pioneer | $9,200 – $14,400 |
Market Benchmark
Angi 2026 Cost Data
Avg. $2,958 ($1,479 – $7,888)Those low numbers reflect handyman jobs with thin acrylic and no warranty. Cascade ShowerWorks prices reflect cast-acrylic walls 2x competing thickness, a thermostatic valve, a frameless glass door, and a lifetime warranty.
What Drives Price Up or Down
Series and Base Selection
Series selection (Pioneer entry vs Luxura mid vs BelAir premium) and Base size/style (zero-threshold curbless costs more than low-threshold step-in).
Doors and Hardware Finish
Door style (frameless 3/8-inch vs semi-frameless 5/16-inch slider) and Hardware finish (matte black and champagne bronze cost more than chrome).
Plumbing and Accessory Load
Drain reroute (off-center existing drain adds $1,200 to $2,400) and Accessory load (bench, niche, dual rain heads, fold-up padded seat).
"See real wall samples in your bathroom. Get a written quote the same day."
BOOK MY FREE CONSULT · CALL (346) 678-4776Will Converting My Tub Hurt Resale Value?
The honest answer: it depends on how many bathrooms your house has.
Listing agents in Memorial, Sugar Land, and The Woodlands report walk-in master showers regularly out-photograph and out-show traditional tub-shower combos. The "no tub anywhere" home is the only configuration where conversion can hurt resale.
"We did a curbless shower for my mom. Cascade ShowerWorks installed grab bars where the certified physical therapist marked them, used a zero-threshold base, and finished in one day. The whole job was $11,800 and it changed how my mom uses her bathroom." (Verified Houston Homeowner)Book My Free Consult · Call (346) 678-4776
Lifetime Warranty Backed by Samuel Mueller
Most shower companies write a "lifetime warranty" that excludes installation defects, hard-water damage, color change, surface micro-cracking, valve leaks, base movement, and resale. Cascade's warranty is the opposite.
01
What's Covered
What's Covered
02
Warranty
Warranty
Warranty happens on a 30-second phone call when you sell. No paperwork. No fee. The new owner inherits the same coverage.

Service Areas Across
Greater Houston
Cascade ShowerWorks installs tub-to-shower conversions across the 9-county Greater Houston metro: Harris, Fort Bend, Montgomery, Brazoria, and Galveston counties.
Inner Loop
Houston, Bellaire, West University Place, The Heights, Montrose, Rice Military, EaDo, Museum District.
Memorial Villages and West-Central
Memorial, Memorial City, Bunker Hill Village, Hedwig Village, Hilshire Village, Hunters Creek Village, Piney Point Village, Spring Valley Village, Energy Corridor, Briargrove, Tanglewood, Galleria.
West, Northwest, North
Katy, Cinco Ranch, Cypress, Tomball, Jersey Village, Spring, Klein, Champions, Humble, Atascocita, Kingwood, The Woodlands.
East, Southeast, Bay Area
Baytown, Pasadena, Deer Park, La Porte, Webster, Clear Lake, League City, Friendswood, Galveston, Texas City, Dickinson.
Southwest / Fort Bend
Sugar Land, Missouri City, Stafford, Pearland, Richmond, Rosenberg, Fulshear.
Zip Code Support
If your zip code is not on the list, call (346) 678-4776. We confirm coverage and route additional zip codes weekly.





Frequently Asked Questions
Nine of the questions Houston homeowners ask us most often about tub-to-shower conversions. Pricing, timeline, drain logistics, permits, and resale value —all answered straight.
A Cascade ShowerWorks tub-to-shower conversion runs $9,200 to $14,400 all-in (Pioneer series, 60x32 footprint, cast-acrylic walls, thermostatic valve, frameless 3/8-inch glass door, one accessory). Luxura and BelAir series upgrades push the range higher. The franchise competitors (Bath Fitter, Re-Bath, Jacuzzi, Statewide) charge $17,000 to $32,000 for the same scope.
One day. Crew arrives at 7:30 AM and finishes by 5:30 PM. Most jobs run 8 to 10 hours total. The shower is ready to use 24 hours after completion (silicone cure time). The full project from signed quote to install takes 3 to 5 weeks for Pioneer catalog patterns.
Yes. Most homes have a 60-inch alcove tub footprint that converts directly to a 60x32 walk-in shower with no expansion. The wall studs stay. The supply lines stay. The drain usually stays. We design the new shower base around the existing drain to keep cost down and avoid cutting the slab.
Usually no. Most tubs have a left-end or right-end drain. We install the new shower base centered around the existing drain location. When the existing drain is off-center or non-code, a reroute through the slab adds $1,200 to $2,400 and appears as a line item on your written quote.
A like-for-like tub-to-shower conversion that keeps the existing footprint and drain location typically falls under standard repair scope and does not require a separate City of Houston Public Works permit. A reroute, expansion, or zero-threshold ADA conversion that moves plumbing or alters the footprint is permitted accordingly. Cascade ShowerWorks pulls and posts any required permits before the install date.
Only if you remove the last tub in the house. If you have two or more full bathrooms, converting the master tub to a walk-in shower typically helps resale. Listing agents in Memorial, Sugar Land, and The Woodlands report walk-in master showers out-photograph traditional tub-shower combos. Keep at least one tub elsewhere in the house if your home has only one full bath.
For most homeowners with a tub used less than once a month, yes. The conversion recovers 15 square feet of usable bathroom, removes the 16-inch step-over fall risk, and finishes in one day. At Cascade ShowerWorks Pioneer pricing ($9,200 to $14,400), the conversion costs less than half of a comparable franchise quote and carries a lifetime warranty that adds documented resale value.
Yes. Zero-threshold curbless bases, grab bars placed by certified physical therapist guidance, fold-up padded seats, and slide-bar hand showers. Curbless conversions typically use the Luxura series ($14,400 to $21,900) for the larger panel formats and accessible-base configurations.
Yes. Texas RMP / Master Plumber License #[Insert Texas TSBPE License Number]. Full general liability and workers' compensation coverage. Sam Mueller installer certifications on every lead installer. BBB profile in good standing.
Ask us live during the free in-home consult.
A Cascade designer brings every wall sample, base color, door style, and hardware finish to your bathroom. 60–90 minutes. Written line-by-line quote. No high-pressure pitch.
Book Your Free Tub-to-Shower Conversion Consult
Showers are the only thing we install.
If your tub never gets used, the step-over is unsafe, or the original surround is cracking, the wet zone is past its useful life. Call the company that converts the tub before dinner.
Book My Free Consult. 60 to 90 minutes, in-home. Confirmed within one business hour. Written quote, line by line. No 90-minute pitch. No "today only" pressure.
Book Your Free Tub-to-Shower Conversion Consult
Call (346) 678-4776. Or visit 1800 Sherwood Forest St C-1A, Houston, TX 77043. Open 24/7.

Cascade ShowerWorks · 1800 Sherwood Forest St C-1A, Houston, TX 77043 · (346) 678-4776 · Open 24/7



